Maintenance Of Raymond Mill

Raymond mill requires mechanical personnel with professional basic knowledge to reasonable operation and scientific maintenance, according to the instructions, which can make Raymond mill work more efficiently. The common problems and solutions of Raymond mill are as follows:

1. Oil leakage of main engine

Most parts of Raymond mill are equipped with the most advanced oil packages in China. The damage of oil packages is the direct factor leading to oil leakage of the main engine of Raymond mill. In addition, excessive oil viscosity, oil pump will cause bearing oil shortage and heating, which are the main causes of oil leakage of the main engine of Raymond mill. Therefore, according to the instructions of Raymond mill, the oil label and viscosity should be adjusted.

2. The fineness of the finished product of Raymond mill is too coarse or too fine.

The blades of the analyzer are worn seriously and can not be classified; the air volume of the fan is inappropriate; the air volume of the small fan should be properly changed to solve the problem of excessive roughness, and the problem of excessive fineness can be solved by increasing the air volume.

3. The mill does not produce powder or produces less powder and produces lower output.

The shovel blade is worn out, the material cannot be shoveled, the air duct is blocked, and the air leakage seal of the pipeline is not good.

4. Fan vibration

Unbalanced powder accumulation or wear on the wind blade; loose anchor bolts. It can remove the powder accumulated in the blade or replace the blade, and tighten the anchor bolt.

5. Noise of main engine

The ring of the roller grinding on the Raymond mill is seriously distorted. Adjust feeding quantity, change spade, change feed size, roll and ring.

6. Damage of powder feeding bearing of roller grinding device

Oil breakage or seal ring damage; Raymond mill maintenance and cleaning are long-term lack; timely refueling according to the stipulated time; regular cleaning, replacement of oil seals.

Raymond mill market has the fastest profit recovery in the construction engineering and railway equipment industry. It plays an important role in its production and development. Understanding the maintenance and maintenance of Raymond mill can get better profits.